Hunting for a way to jazz up your wall art? Consider making your have Diy acrylic frames for personalized 3D artwork. This put up will wander you via specifically how I designed these in my home.
If you are wanting for a personalized way to body your photographs or artwork to make it stand out from the wall, these Do-it-yourself acrylic frames are the ideal detail.
I landed on these frames since I desired a minimal something to include a little added pizzazz to my rest room wall. 
We decided to integrate my partner&rsquos like of golfing into the blend by printing photos he took of PGA golfing programs he&rsquos performed in black and white.
I really like when artwork is a discussion piece, so this was the best addition to the toilet wall.
To make it really stand out, I built these Diy acrylic frames for just about every of the photographs.
Right here are the steps I took&hellip 
Table OF CONTENTS
- one. Assemble your supplies.
- two. Tape each individual facet of every single corner.
- three. Mark in which you want to drill your holes.
- four. Drill your holes.
- five. Use your glue dots to safe your images to the body.
- six. Mark the complete on the wall exactly where you plan to hold it.
- 7. Use your punch software to mark the entire on the wall.
- 8. Drill your holes in the wall.
- nine. Screw the standoffs into the wall.
- 10. Attach your frame to the standoffs.
- 11. Revel in the finished solution!
Disclaimer: This submit does contain affiliate inbound links for your ease. This is at NO further price to you but earns me a small commission. To read through far more, examine out our disclosure coverage.
1. Obtain YOUR Supplies.
Initial issues to start with, get all your materials. All resources for almost everything I utilized are linked under. I also incorporated a listing with backlinks of what we made use of to hold the frames, way too. 
FOR Creating THE Do-it-yourself ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (1 for the sizing of the opening of your standoffs and a person for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Resource (I made use of a Sharpie)
FOR HANGING THE Do it yourself ACRYLIC FRAMES:
- Pencil
- Handheld Amount
- Punch
- Screwdriver
2. TAPE Every single Aspect OF Every CORNER.
Plexiglass/acrylic is very delicate.
For the reason that of this, you have to be incredibly mindful when you are drilling the holes.
Inserting a piece of painter&rsquos tape on possibly facet the place you prepare to drill your hole will support hold the acrylic sheet from breaking or cracking when you drill.
I also held the protecting cover on each and every facet of the piece, way too.
3. Going Here Exactly where YOU WANT TO DRILL YOUR HOLES.
When you have put the painter&rsquos tape on all four sides (or nonetheless several places you plan to drill a gap), you can place a mark of wherever you want to drill your gap.
I drilled my holes 1&Prime in from each edge as you can see from the image above.
4. DRILL YOUR HOLES.
In advance of basically drilling, double and triple look at that your marks are stage each horizontally and vertically.
You&rsquoll want to have these level for when you hang them. 
The drill little bit you pick ought to be significant plenty of to let the standoff to suit within just the hole.
I would do a take a look at operate on a piece of scrap substance to make positive it is large ample. 
After you are selected that the marking are degree and the little bit is massive sufficient, you want to begin drilling.
In this article is a fantastic movie to stick to if you would like a demonstration on how to drill by acrylic.
You want to use about half power when you are drilling.
Gradual and regular. If you go to rapidly, the acrylic will crack, so get your time.
As you drill you really should see spirals of the acrylic slowly getting removed. 
Repeat the drilling for every single gap you have to have.
5. USE YOUR GLUE DOTS TO Secure YOUR Shots TO THE Body.
When your holes are designed, you can increase your photo to the piece of acrylic/frame.
The important in this article is to yet again, make absolutely sure your photo is level ahead of you wholly secure it to the body.
The glue dots are pretty sticky and don&rsquot allow for a large amount of wiggle space, so it might be a excellent idea to line up a piece of lined paper driving the body to enable you line the edges of your photograph.
What ever trick operates for you to make confident the photo gets glued to the frame stage will do. 
6. MARK THE Entire ON THE WALL Exactly where YOU Plan TO Dangle IT.
As you get started to cling, mark your holes on the wall, but make confident your frame is stage.
If you measured correctly in the action just before drilling, the holes on your body should really by now be level.
If you are hanging extra than a person body like I did, make absolutely sure each individual body is amount in your grid, far too. 
7. USE YOUR PUNCH Software TO MARK THE Full ON THE WALL.
I appreciate this tool so substantially since it will get your hole started off and permits your drill to stay in spot when you commence drilling.
If you don&rsquot have a single, I extremely suggest it!
8. DRILL YOUR HOLES IN THE WALL.
Be guaranteed to use a little bit that suits the screws that arrived alongside with your standoffs.
This will most probably be a more compact little bit than the one you made use of on the frames.
I also utilised a stud finder to see if I essential drywall anchors, but for the reason that these frames are not that large, you could almost certainly do without them.
nine. SCREW THE STANDOFFS INTO THE WALL.
At the time you obtain your standoffs, you&rsquoll see how they function.
In buy for the picture to &ldquostand off&rdquo the wall, you have to protected the standoff with the presented screw just before attaching the image to the standoffs.
As you can see from the picture, earning absolutely sure all the things is level and measured the right way is super significant. 
ten. Attach YOUR Frame TO THE STANDOFFS.
After you&rsquove hooked up the standoffs, it&rsquos time to connect the pics!
Line up the standoffs with your drilled holes and protected the standoffs.
If all goes very well, anything will line up correctly and be completely ready to go!
If you are like my father and I, you&rsquoll appear across at minimum one that doesn&rsquot line up beautifully.
For this, we cheated a small little bit and secured the standoff to the frame and employed a glue dot to protected it to the wall, so it didn&rsquot go.
We only experienced to do this for two corners of two frames, but don&rsquot get worried if you mess up a single&hellip We&rsquove been there! 
11. REVEL IN THE Finished Solution!
Now it&rsquos time to take pleasure in your do the job!
We did a grid of nine whole images which was a significant endeavor with all the measuring, but I&rsquom in like with how it turned out.
Allow me know in the comments what you think of the completed item!